LaCie 301515KUA Uživatelský manuál stáhnout pdf (Strana 13)

LaCie Network Space 2 • DESIGN BY NEIL POULTON Connecting to a Network

User Manual page 13

2.2. STEP 2: Turn On the Drive

1. Connect the Ethernet cable as described in section 2.1. STEP 1:

Connect the Ethernet Cable.

1. Connect the power supply to a wall outlet and to the LaCie

Network Space 2 (Fig. 06).

2. Turn on the drive by pressing and holding the power button on

the back of the drive for two seconds (Fig. 07). The front LED

will turn on and then begin blinking.

The drive is ready to be accessed once the blue LED has stopped

blinking. The product may take up to 30 seconds to boot.

Now move on to step 3, section 2.3. STEP 3: Connect using LaCie

Network Assistant.

CAUTION: Only use the AC adapter supplied with your speciﬁc

LaCie device. Do not use a power supply from another LaCie device

or another manufacturer. Using any other power cable or power

supply may cause damage to the device and void your warranty.

Always remove the AC adapter before transporting your LaCie drive.

Failure to remove the adapter may result in damage to your drive

and will void your warranty.

TECHNICAL NOTE: You may use your LaCie drive when in a for-

eign country thanks to its 100-240 Volt power supply. To be able to

use this feature, you may need to purchase an appropriate adapter

or cord. LaCie accepts no responsibility for any damage to the drive

resulting from the use of an inappropriate adapter. Using an adapt-

er other than one authorized by LaCie will void your warranty.

Fig. 06

Fig. 07

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Žádné komentáře

LaCie 301515KUA Uživatelský manuál Strana 13